Product Summary

The NCP1337P is a true current mode modulator and a demagnetization detector which ensures full Borderline/Critical Conduction Mode in any load/line conditions together with minimum drain voltage switching (Quasi Resonant operation). The transformer core reset detection of the NCP1337P is done internally, without using any external signal, due to the Soxyless concept. The frequency of the NCP1337P is internally limited to 130 kHz, preventing the controller to operate above the 150 kHz CISPR.22 EMI starting limit. By monitoring the feedback pin activity, the controller enters ripple mode as soon as the power demand falls below a predetermined level. As each restart of the NCP1337P is softened by an internal soft start, and as the frequency cannot go below 25 kHz, no audible noise can be heard.

Parametrics

NCP1337P maximum ratings: (1)Voltage on Pin 8 (HV) when Pin 6 (VCC) is Decoupled to Ground with 10μF VHV: -0.3 to 500 V; (2)Maximum Current in Pin 8 (HV): 20mA; (3)Power Supply Voltage, Pin 6 (VCC) and Pin 5 (DRV) VCC max: -0.3 to 20 V; (4)Maximum Current in Pin 6 (VCC): μ3mA; (5)Maximum Voltage on all Pins except Pin 8 (HV), Pin 6 (VCC) and Pin 5 (DRV): -0.3 to 10 V; (6)Maximum Current into all Pins except Pin 8 (HV), Pin 6 (VCC) and Pin 5 (DRV): ±10mA; (7)Maximum Current into Pin 6 (DRV) during ON Time and TBLANK: ±1.0 A; (8)Maximum Current into Pin 6 (DRV) after TBLANK during OFF Time: ±15mA; (9)Thermal Resistance, Junction to Case RθJC: 57 ℃/W; (10)Thermal Resistance, Junction to Air, SOIC Version RθJA: 178 ℃/W; (11)Thermal Resistance, Junction to Air, DIP Version RθJA: 100 ℃/W; (12)Maximum Junction Temperature TJMAX: 150 ℃; (13)Operating Temperature Range: -40 to +125 ℃; (14)Storage Temperature Range: -60 to +150 ℃; (15)ESD Capability, HBM Model per Mil.std.883, Method 3015 (All Pins except HV): 2.0 kV; (16)ESD Capability, Machine Model: 200 V.

Features

NCP1337P features: (1)Free-Running Borderline/Critical Mode Quasi-Resonant Operation; (2)Current-Mode; (3)Soft Ripple Mode with Minimum Switching Frequency for Standby; (4)Auto-Recovery Short-Circuit Protection Independent of Auxiliary Voltage; (5)Overvoltage Protection; (6)Brown-Out Protection; (7)Two Externally Triggerable Fault Comparators (one for a disable function, and the other for a permanent latch); (8)Internal 4.0 ms Soft-Start; (9)500mA Peak Current Drive Sink Capability; (10)130 kHz Max Frequency; (11)Internal Leading Edge Blanking; (12)Internal Temperature Shutdown; (13)Direct Optocoupler Connection; (14)Dynamic Self-Supply with Levels of 12 V (On) and 10 V (Off); (15)SPICE Models Available for Transient and AC Analysis; (16)These are Pb-Free Devices.

Diagrams

NCP1337P block diagram

Image Part No Mfg Description Data Sheet Download Pricing
(USD)
Quantity
NCP1337PG
NCP1337PG

ON Semiconductor

Current Mode PWM Controllers PWM CONTROLLER

Data Sheet

0-1: $0.77
1-25: $0.69
25-100: $0.53
100-500: $0.47
Image Part No Mfg Description Data Sheet Download Pricing
(USD)
Quantity
NCP100
NCP100

Other


Data Sheet

Negotiable 
NCP1000
NCP1000

Other


Data Sheet

Negotiable 
NCP1000P
NCP1000P

ON Semiconductor

Other Power Management 700V 500mA Switching

Data Sheet

Negotiable 
NCP1000PG
NCP1000PG

ON Semiconductor

Other Power Management 700V 500mA Switching w/OVP and Zero Duty

Data Sheet

Negotiable 
NCP1001
NCP1001

Other


Data Sheet

Negotiable 
NCP1001P
NCP1001P

ON Semiconductor

Other Power Management 700V 500mA Switching

Data Sheet

Negotiable